| Testimonials |
| What other subs are saying about The Dryer-Ell |
 |
|
|
"Just wanted to thank you for getting the Dryer-Ell to me so quickly. I had already cut through my painted Hardi-board
and installed my louver and everything when the County Inspector pointed out that I was not within code. But the inspector
recommended the Dryer-Ell and said all I had to do was replace the 90, and I was set. You really saved me A TON of grief. I
wish I had known about your products before I ever started building. Oh yeah -- the correct specs were on your site,
too. Another reason I wish I'd gone there first!
Anyhow, thank you - thank you - thank you!"
Todd in Alabama
"This sweeping 90 is really the trick. I am a third generation in the construction business and master
plumber since 1978. I'd like to shake your hand. I wish I thought of it."
Wendell Pearson, WR Pearson Construction, Tifton, GA
"I am an Architectural Engineer and in the process of constructing an 8 unit apartment building for
myself. The dryer runs with a traditional 90 bend would have been 32ft. By using your product
I was able to meet the IMC 2006 25ft requirement without installing any booster fans."
Chris Bohley, Architectural Engineer
"I recently finished installing 2 of the long 90 degree elbows that I purchased. After the
install I noticed how much power air was actually blowing outside. I kept asking my wife if
she noticed if the jeans and towels were drying much faster and she said yes. A huge
difference.
My situation was one of those installs where there were many 90 degree standard elbows. In
fact there were 6. I was able to eliminate them down to two of the ones you sell. The old
venting had many locations (especially the 90 degree elbows) with 30% blockage of a build up of lint in some.
SO I'm basically saying THANKS! I can sleep better a night knowing that the dryer vent is not so restricted."
Jerry Gutjahr, Homeowner
"My firm is engineering a large project in the northeast with serious length-of-run issues for the dryer. The combination
of your Dryerbox receptacle and the long-turn Dryer-ell are
making the difficult laundry room locations possible in this project."
Maryland Engineer, Prefers to Remain Anonymous
"I've been in the construction business for 40 years as a carpenter/builder and am totally stoked with both your Dryerbox and your Dryer-ell. These two items represent significant improvements in duct ventilation and should make a huge difference in energy savings as well as reducing the fire potential. Fires caused by the dryer are serious issues that affect all of us one way or the other. If your company was public, I'd buy a ton of stock in it. "
"This is the biggest No-Brainer I've seen in a long time."
Robert Hecox, Carpenter, Sequim WA
"I am the custom home supervisor with Nuccio Air
and get Red Tagged all the time for dryer runs over 25 feet.
Yesterday for example I was rejected for a run that was 27
feet. The builder did not want to pay the $400 for a booster
fan so finding your dryer-ell provided me an alternative
that saves me a lot of heart ache. I think it's one of the
best new items I've seen for our industry in a long time. In
our jurisdictions, length of run issues with the dryer
conduit are real and all the time cause us heart ache. The
savings each of these provide will be a huge benefit for our
company and all the other trades that work in our four
municipalities region (Counties of Hillsborough, Pasco,
Hernando and the City of Tampa). My hat's off to you for the
innovation and delivery of a product well over due. "
Tommy Buchanan, Supervisor, Nuccio Heating & Air,
Tampa FL
"These long radius elbows really look good. There
is no reason they will not work 100 times better than other
elbow options."
Stephen Congleton, Loveland,
OH
"I just completed re-piping
my dryer exhaust system at my house is Redwood City. Used
(3) of your 4" Dryer-ell's, which worked perfectly. My
washer and dryer is located in the middle of my house and
the dryer exhaust pipe run is approx. 25'-30' feet long. I
was able to replace (7) typical 4" 90 degree elbows with
only (3) Dryer-ell's."
Jim Heywood,
Redwood City, CA
"I have
contractors screaming for this product. Without your
Dryer-ell they are required to install expensive booster fans.
These contractors have reviewed your engineering data and
view the product as an excellent alternative to installing
a booster fan. I have also spoken with other distributors
in our area and they too seem very interested in carrying
this product. I like it and we are ready to get some
in here."
Chris Kidwell, Lambert Heating
and Air Conditioning, Sioux Falls, SD |
|
|
|
|
|
Send Link To A Friend/Associate
|
Request A Brochure